Making Rocks for Your Model Railroad Scenery
Making rocks is the next thing to do after you’ve developed the terrain and made land formations for your layout. That is, assuming you want or need rock formations for the scenes you are trying to depict. Obviously, if most of your layout is based on city railroading or wheat fields and grain service, you may not need many rocks. However, I suspect most layouts will contain a few rocky areas.
I like rocks and mountains personally even though I live on a flat coastline. I have always greatly enjoyed visiting rocky and mountainous areas of this country and attempting to recreate them on the layouts that I have built.
The following is a guide to help you make realistic artificial rocks with techniques that I have found to be successful (and some that I haven’t done yet, but others have accomplished with great success).
Using Commercial Molds for Making Rocks
This is one method that I have used frequently for making rocks which begins with purchasing commercially available rubber rock molds along with Hydrocal, a light form of plaster (better than real plaster for making molds because it shows more detail on the final product, and your layout or diorama won’t be so heavy if you have to move it). There are many different sizes and shapes of molds available. You have to choose which ones would be the most appropriate for what you are trying to do. For example, are you creating an outcropping of rocks, a rock wall or cliff, or just adding rock formations to the side of a mountain?
You don’t really need to buy a lot of these. The rocks you make with just a few of these molds can be rotated, turned upside down, put together in various combinations in different areas of your layout so that the average observer will not be able to tell that the empire of rocks and mountains you have made came from only 3-4 different rock molds. In addition, when you incorporate each of the rock molds into your layout, you can modify them further by using plaster cloth and/or a molding material called Sculptamold with which you can create your own rock formations in between the rocks you have made with the molds.
Making Your Own Rubber Latex Rock Molds
The traditional way of doing this is to use a real rock that looks interesting to you and that you would like to use as a mold for making rocks.
The technique involves brushing multiple layers of liquid rubber latex onto the surface of the real rock with an appropriate drying period between each layer. A layer of cheesecloth should be sandwiched in between every 2-3 layers of latex to add strength. Once you have about 6-7 layers of latex and cheesecloth and after it has completely dried, you can then peel the rubber mold off the surface of the rock being careful not to tear it.
Then use the same technique described above for pouring Hydrocal into the “wetted” mold and let dry overnight.
* * *
Aluminum Foil Molds
One of my own techniques for making rocks that has worked for me is to take a sheet of aluminum foil and wrinkle it up so that there are lots of crevices. Then place the wrinkled sheet on top of dry sand inside a 2-inch deep pan or box. You can shape the sand and foil inside the pan whatever way you want so that the completed mold will be curved or rounded, rectangular or any other shape or size that you wish.
Then spray the aluminum foil with your mixture of water containing a few drops of dishwashing liquid so the mold can be easily removed later. Pour the Hydrocal into the mold and let it dry overnight.
After the molded plaster is dried, you can further shape it with a small handsaw or coarse sandpaper so that it fits in your space on the layout better. You can also scrape the front surface of the rock with a knife or carving tool or sandpaper to make it look more coarse or textured and to make more indentations and crevices if you need to in order to enhance the realism. Then incorporate the dried mold into your layout as described above.
You can purchase sheets of ready made “rocks” at hobby stores that can be cut and shaped however you want in order to fit them into the space where you need them. Sculptamold or plaster-cloth can then be used to fill in the spaces around the edges to help them blend into the terrain. These make very believable rock walls if blended in well.
Homemade Rock Walls
Another way of making rocks, walls and cliffs that I like to use is to just apply Sculptamold in an irregular fashion using a small trowel and/or your fingers onto the surface of the plaster-cloth that you used to form your terrain. After you have applied the Sculptamold to the surface you can cut lines and crevices any way you want to try to simulate an irregular rock surface.
Another option is to consider using ready-made rocks manufactured by Woodland Scenics. These are available in several different shapes and sizes and would work for any scale. They can easily be incorporated into any layout even if the scenery is almost completely finished. Once you glue them in place, it's easy to add bushes and other vegetation around the edges to make it look like the rocks were there long before the vegetation grew. Despite being very realistic, one of the best things about these "rocks" is that they can be fit together to form a long wall of rock to serve as a backdrop for your trains, or they can be connected to create a long vein of rock embedded into a hillside. Here is a link to a video on the WS site that shows how to use them...https://youtu.be/LiCsN2l8fMI
If you have a sizable layout, you will probably want to use a combination of most or all of these techniques for making rocks. That will make for a more interesting degree of variability in your scenery that will keep your viewers guessing about how you did it all!
(Reprinted with permission from BYMRR.com)